In new construction, the primary source of moisture entering the building is most likely from the newly poured concrete slab. The National Ready Mixed Concrete Association (NRMCA) describes the ‘What’ and ‘How’ of concrete slab moisture in their 2004 Concrete in Practice publication CIP 28-Concrete Slab Moisture.

This video features our M-Series Makeup Air technology with evaporative cooling.

For years we have worked with an industrial retrofit contractor. He often installed vertical S-Series heaters in locations where space was at a premium, both indoors and outdoors. Since Cambridge did not provide a stand for vertical units, he had a structural engineer design a four-legged stand made from 2” x 2” square tubing. The legs would be cut to length in the field and a base plate welded to the leg.

In this animation, the technology of a ESC-Series two-stage evaporative cooling unit is showcased.

In this recorded webinar produced for Engineered Systems in the Fall of 2019, our VP of Sales and Marketing, Doug Eisenhart, discusses the three trends driving manufacturing excellence.

An industrial retrofit contractor who has used Cambridge S-Series heaters for years asked us to provide discharge ductwork. Some of the heaters were vertical stand mounts and some were horizontal stand mounts. The duct we provided was sized to fit the discharge opening of the heater for the vertical mount. For the horizontal mount, our standard downturn was basically rotated 180° and the duct was sized for the discharge opening.